StarPlas HIPS 3200
High Impact Polystyrene (HIPS) Extrusion & Thermoforming Grade
StarPlas HIPS 3200 is a high impact, low flow polystyrene grade intended for the extrusion and thermoforming process. Th StarPlas HIPS 3200 is utilized in products for industrial packaging, deep draw thermoforming and custom multilayer extrusion sheeting.
Please contact us with any additional questions you may have regarding this material. 940-240-0012
Technical Datasheet
← Download
| Melt Flow | ASTM Test | Typical Value |
|---|---|---|
|
Flow, gm/10 min., 200/5.0 |
D-1238 |
3.0 |
|
Impact Properties |
ASTM Test |
Typical Value |
|
Izod, ft-lbs/in, notched |
D-256 |
2.3 |
|
Falling Dart |
D-3029 |
110 |
|
Tensile Properties |
ASTM Test |
Typical Value |
|
Strength, psi |
D-638 |
3,600 |
|
Elongation, % |
D-638 |
50 |
|
Flexural Properties |
ASTM Test |
Typical Value |
|
Modulus, psi |
D-790 |
320,000 |
|
Thermal Properties |
ASTM Test |
Typical Value |
|
Heat Distortion, F Annealed |
D-648 |
202 |
Other Information
This material will comply with FDA requirements as described in 21 CFR 177.1640.
The above values are intended as a general guide and do not represent results that may be obtained elsewhere. Lone Star Chemical makes no warranty of merchantability and there is no warranty that goods supplied shall be fit for any particular purpose.