StarPlas HDPE 50100
High Molecular Weight HDPE Blow Molding, Sheet Extrusion
StarPlas HDPE 50100 is a HMW high density polyethylene (HDPE) for extra strength blow molding and sheet extrusion. The low melt flow provides high molecular weight.
HDPE 50100 is utilized in products such as gas cans, thick wall blow molding, single and multilayer sheet extrusion, and wire and cable applications.
Melt Index (2.16 Kg-230°C) g/10 min: PE-HDPE-50-100
Flexural Modulus PSI: 10
Izod 73°F (ft-lb/in): >12
Specific feature(s):
Please contact us with any additional questions you may have regarding this material. 940-240-0012
Technical Datasheet
← Download
| Melt Flow | ASTM Test | Typical Value |
|---|---|---|
|
Flow, gm/10 min., 190/5.0kg |
D-1238 |
10 |
|
Density |
D-792 |
0.948 |
|
Impact Properties |
ASTM Test |
Typical Value |
|
Izod, ft-lbs/in, notched |
D-256 |
>12.0 |
|
Tensile Properties |
ASTM Test |
Typical Value |
|
Strength, psi |
D-638 |
3,650 |
|
Elongation, % |
D-638 |
700 |
|
Flexural Properties |
ASTM Test |
Typical Value |
|
Modulus, psi |
D-790 |
175,000 |
|
Thermal Properties |
ASTM Test |
Typical Value |
|
Heat Distortion, F Annealed |
D-648 |
174 |
Other Information
This material will comply with FDA requirements as described in 21 CFR 177.1640.
The above values are intended as a general guide and do not represent results that may be obtained elsewhere. Lone Star Chemical makes no warranty of merchantability and there is no warranty that goods supplied shall be fit for any particular purpose.