StarPlas HDPE 5502
High Density Polyethylene, Phillips Process High Impact, Extrusion, Blow Molding grade
StarPlas HDPE 5502 is mainly used in blow molding for household and industrial chemical containers.
Superior environmental stress cracking resistance and stiffness. FDA, USP VI and DMF listed.
Please contact us with any additional questions you may have regarding this material. 940-240-0012
Technical Datasheet
← Download
| Melt Flow | ASTM Test | Typical Value |
|---|---|---|
|
Flow, gm/10 min., 190/2.16 |
D-1238 |
0.35 |
|
Density |
D-792 |
0.955 |
|
Impact Properties |
ASTM Test |
Typical Value |
|
Izod, ft-lbs/in, notched |
D-256 |
>6.0 |
|
Tensile Properties |
ASTM Test |
Typical Value |
|
Strength, psi |
D-638 |
4,000 |
|
Elongation, % |
D-638 |
600 |
|
Flexural Properties |
ASTM Test |
Typical Value |
|
Modulus, psi |
D-790 |
200,000 |
|
ESCR |
D-1683 |
50 hours |
|
Thermal Properties |
ASTM Test |
Typical Value |
|
Heat Distortion, F Annealed |
D-648 |
167 |
Other Information
This material will comply with FDA requirements as described in 21 CFR 177.1640.
The above values are intended as a general guide and do not represent results that may be obtained elsewhere. Lone Star Chemical makes no warranty of merchantability and there is no warranty that goods supplied shall be fit for any particular purpose.