StarPlas PPH 0200
Homopolymer Polypropylene Film and extrusion grade
StarPlas PPH 0200 is a low melt flow homopolymer polypropylene used in film and extrusion application. StarPlas PPH 0200 is utilized in products such as BOPP film, thermoformed sheet, tape, twine and woven bags.
Please contact us with any additional questions you may have regarding this material. 940-240-0012
Technical Datasheet
← Download
| Melt Flow | ASTM Test | Typical Value |
|---|---|---|
|
Flow, gm/10 min., 230/2.16 |
D-1238 |
1.5 – 2.0 |
|
Impact Properties |
ASTM Test |
Typical Value |
|
Izod, ft-lbs/in, notched |
D-256 |
0.9 |
|
Tensile Properties |
ASTM Test |
Typical Value |
|
Strength, psi |
D-638 |
5,000 |
|
Elongation, % |
D-638 |
11 |
|
Flexural Properties |
ASTM Test |
Typical Value |
|
Modulus, psi |
D-790 |
211,000 |
|
Thermal Properties |
ASTM Test |
Typical Value |
|
Heat Distortion, F Annealed |
D-648 |
210 |
Other Information
This material will comply with FDA requirements as described in 21 CFR 177.1640.
The above values are intended as a general guide and do not represent results that may be obtained elsewhere. Lone Star Chemical makes no warranty of merchantability and there is no warranty that goods supplied shall be fit for any particular purpose.