StarPlas mPPH 300
Isotactic homopolymer PP with special metallocene catalyst
StarPlas mPPH 300 is an isotactic homopolymer polypropylene a metallocene catalyst. StarPlas mPPH 300 is designed for melt spun, spunbond fibers and extrusion coatings.
Technical Datasheet
← Download
| Melt Flow | ASTM Test | Typical Value |
|---|---|---|
|
Flow, gm/10 min., 230/2.16 |
D-1238 |
30.0 |
|
Density |
D-792 |
0.900 |
|
Impact Properties |
ASTM Test |
Typical Value |
|
Izod, ft-lbs/in, notched |
D-256 |
0.7 |
|
Tensile Properties |
ASTM Test |
Typical Value |
|
Tenacity |
D-3218 |
2.5 g/denier |
|
Elongation, % |
D-3218 |
185 |
|
Flexural Properties |
ASTM Test |
Typical Value |
|
Modulus, psi |
D-790 |
N/A |
|
Thermal Properties |
ASTM Test |
Typical Value |
|
Melting Point F |
DSC |
300 |
Other Information
This material will comply with FDA requirements as described in 21 CFR 177.1640.
The above values are intended as a general guide and do not represent results that may be obtained elsewhere. Lone Star Chemical makes no warranty of merchantability and there is no warranty that goods supplied shall be fit for any particular purpose.