StarPlas PPCO 1030
High Impact Copolymer Polypropylene (COP) High Impact, Extrusion, Blow Molding grade
Starplas PPCO 1030 is a high impact copolymer polypropylene that can be used in injection molding, extrusion processes, and blow molding.
Starplas PPCO 1030 is utilized in products such as corrugated sheet, blow molded applications and injection molded parts.
Technical Datasheet
← Download
| Melt Flow | ASTM Test | Typical Value |
|---|---|---|
|
Flow, gm/10 min., 446/4.76 |
D-1238 |
10 |
|
Impact Properties |
ASTM Test |
Typical Value |
|
Izod, ft-lbs/in, notched |
D-256 |
3.00 |
|
Tensile Properties |
ASTM Test |
Typical Value |
|
Strength, psi |
D-638 |
23 |
|
Elongation, % |
D-638 |
7.4 |
|
Flexural Properties |
ASTM Test |
Typical Value |
|
Modulus, psi |
D-790 |
170,000 |
|
Thermal Properties |
ASTM Test |
Typical Value |
Other Information
This material will comply with FDA requirements as described in 21 CFR 177.1640.
The above values are intended as a general guide and do not represent results that may be obtained elsewhere. Lone Star Chemical makes no warranty of merchantability and there is no warranty that goods supplied shall be fit for any particular purpose.