StarPlas PPCR 350 CL
Random Clarified Copolymer PP Clarified, Injection Molding grade, FDA
StarPlas PPCR 350 CL is a clarified random copolymer with great clarity. StarPlas PPCR 350 CL is an injection molded grade used for parts that need high clarity with decent impact.
Technical Datasheet
← Download
| Melt Flow | ASTM Test | Typical Value |
|---|---|---|
|
Flow, gm/10 min., 230/2.16 |
D-1238 |
35.0 |
|
Impact Properties |
ASTM Test |
Typical Value |
|
Izod, ft-lbs/in, notched |
D-256 |
1.4 |
|
Tensile Properties |
ASTM Test |
Typical Value |
|
Strength, psi |
D-638 |
4,000 |
|
Elongation, % |
D-638 |
14 |
|
Flexural Properties |
ASTM Test |
Typical Value |
|
Modulus, psi |
D-790 |
150,000 |
|
Thermal Properties |
ASTM Test |
Typical Value |
|
Heat Distortion, F Annealed |
D-648 |
180 |
Other Information
This material will comply with FDA requirements as described in 21 CFR 177.1640.
The above values are intended as a general guide and do not represent results that may be obtained elsewhere. Lone Star Chemical makes no warranty of merchantability and there is no warranty that goods supplied shall be fit for any particular purpose.